Distillation is the recycling technology, the used oil as fuel. This is a unique renewable energy technologies and the easiest to recycle used oil, the impact on energy markets to a large extent the way. Let's look at work flow chart:
Used oil distillation to diesel and gasoline plant: Feed liquid crude oil/Waste Oil Distillation Machines- heating - catalytic cracking - fractionation - cooling liquid - decompression - flammable gas recovery - flammable gas combustion - desulfurization
Waste oil to diesel and gasoline process:
First, pump the waste oil into reactor by oil pump.
Second, use coal/wood/natural gas/fuel oil/electricity heating the reactor.
Third, after heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or u can also call it fuel oil. If you want to get Bead wire separator, through temperature control could separate it and collected into two different oil tanks.
Fourth, some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
Fifth, when use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design Waste Plastic Pyrolysis Machine, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.
Sixth, the exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution. For more information, please visit: qiyuenergy.
留言列表
